Location: Ultra Phosphor Oscilloscopes / UPO2000E Series /
| Specifications | ||||
| Model | UPO2072E | |||
| Bandwidth | 70MHz | |||
| Channels | 2 | |||
| Sampling rate | 1GS/s | |||
| Memory depth | 56Mpts (single channel) | |||
| Waveform capture rate | 83,000wfms/s | |||
| Time base scale (s/div) | 5ns/div~50s/div | |||
| Input impedance | (1MΩ±2%) II (20pF±3pF) | |||
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) | |||
| Waveform record | 65,000 Frames | |||
| Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout,duration, setup/hold, slope, video, code | |||
| Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced | |||
| Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean,RMS, Cycle RMS, Area, Cycle Area, Overshoot, Preshoot, Frequency, Cycle, Rise Time,Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio,Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). | |||
| Number of measurements | Display 5 measurements at the same time | |||
| Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements | |||
| Frequency counter | Hardware 6 bits counter (Channels areselectable) | |||
| Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) | |||
| General Characteristics | ||||
| Power | 100V~240VAC, 50Hz/60Hz | |||
| Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution | |||
| Product color | White and grey | |||
| Product net weight | 3.5kg | |||
| Product size | 336mm×164mm×108mm | |||
| Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable | |||
| Standard individual packing | Carton box | |||
| Standard quantity per carton | 2pcs | |||
| Standard carton measurement | 450mm×420mm×280mm | |||
| Standard carton gross weight | 9.7kg | |||
| Specifications | ||||
| Model | UPO2072E | UPO2074E | UPO2102E | UPO2104E |
| Bandwidth | 70MHz | 100MHz | ||
| Channels | 2 | 4 | 2 | 4 |
| Sampling rate | 1GS/s | |||
| Memory depth | 56Mpts (single channel) | |||
| Waveform capture rate | 83,000wfms/s | |||
| Time base scale (s/div) | 5ns/div~50s/div | |||
| Input impedance | (1MΩ±2%) II (20pF±3pF) | |||
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) | |||
| Waveform record | 65,000 Frames | |||
| Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout,duration, setup/hold, slope, video, code | |||
| Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced | |||
| Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean,RMS, Cycle RMS, Area, Cycle Area, Overshoot, Preshoot, Frequency, Cycle, Rise Time,Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio,Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). | |||
| Number of measurements | Display 5 measurements at the same time | |||
| Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements | |||
| Frequency counter | Hardware 6 bits counter (Channels areselectable) | |||
| Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) | |||
| General Characteristics | ||||
| Power | 100V~240VAC, 50Hz/60Hz | |||
| Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution | |||
| Product color | White and grey | |||
| Product net weight | 3.5kg | |||
| Product size | 336mm×164mm×108mm | |||
| Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable | |||
| Standard individual packing | Carton box | |||
| Standard quantity per carton | 2pcs | |||
| Standard carton measurement | 450mm×420mm×280mm | |||
| Standard carton gross weight | 9.7kg | |||
Region Selection